Tarrago Sneakers Paint is a water-based color dye specially formulated to change the color, customize or restore your smooth leather, synthetic leather or canvas sneakers. Thanks to its high concentration of high quality pigments, it has a high hiding power. It offers a high resistance to wet/dry friction and flexions, preventing the dye from cracking. Satin / Matt finish. To improve the strength of this finish, apply Sneakers Paint Neutral Base, and then the Sneakers Matt or Gloss Maker for matt o glossy finish. Fast drying 1-3 minutes.
1. Clean the shoes with the Sneakers Cleaner, the Sneakers Brush and the Tarrago Shoe Duster.
2. Before painting, stir the content with the brush enclosed, until a homogeneous color is obtained.
3. Customize your Kicks:3.1.
Use the Sponge included to cover larger surfaces. With the semi-wringing Paint brush, paint one corner of the sponge and gently rub over with circular moves on the Sneakers.
3.2. Use the Paint Brush included for small details or customization.
3.3. Use an Airbrush, see the instructions inside airbrush box. Use the neutral base, to dilute the dye and maintain its properties.
The applications must be very light. It is better to apply several thin layers than a single thick layer. After dyeing the first layer of paint (1-3 minutes), apply a second layer if it is necessary, repeating the operation to match the entire color. To accelerate the dyeing process between layers, use a hair dryer with caution (30 cm. minimum distance).
IMPORTANT: FLUOR COLORS - Apply the Sneakers Paint White - 01 previously to achieve a better result.
4. For optimum drying, let it dry for 12 hours.
5. Once the process is finished, wash the Sponge, the Paint Brush or the Airbrush with water to prevent them for drying out.
Get your color!
Sneakers paint can be mixed between them by using the included dossing cap to achieve the desired tone.
To make the color more resistant, you can apply the Sneaker Paint Neutral Base.
Apply the Sneakers Gloss Maker (for a glossy result) or the Sneakers Matt Maker (for a matt result) according to the desired finishing touch.
an application of 1-2 layers, a satisfactory result will be obtained thanks to the great pigmentation of the dye.
For a perfect finish, we recommend let it dry 12 hours.