The perfect complement to the airbrush, it is quiet, durable and can be used by users of all levels. Take it anywhere, it's lightweight and portable.
Auto start and shut-off function.
Made with an oil-free piston, it increases the life of the compressor.
Internal temperature control device.
Overheating prevention system. The compressor stops automatically when the temperature rises and restarts when it returns to the right temperature.
Support to leave the airbrush when not in use.
The perfect complement to the airbrush, it is quiet, durable and can be used by users of all levels. Take it anywhere, it's lightweight and portable.
HOW TO USE
Connect the hose to the air outlet of the compressor.
Place the airbrush holder in the slot on the side of the compressor as shown in the picture.
Insert the holder into the slot.
Press down to engage.
Connect the compressor to the airbrush via the air hose.
Connect the adapter to the compressor and plug it into the power supply.
Turn on the compressor by turning the control knob.
Adjust the pressure to the job by turning the regulator knob to the right to increase the pressure and to the left to decrease the pressure.
SPECIFICATIONS
Power input: AC100-240 V, 50/60 HZ, 3.0 A.
Output current: DC12V.
Flow rate: 13 litres per minute.
Maximum pressure: 2.3 bar.
Auto stop: 1.45 bar.
Auto start: 0.9 bar.
Includes: 1.5 m. air hose.
Read the instructions carefully before starting to paint trainers with the airbrush.
If you do not know how to paint with airbrush go to the product sheet of the airbrush and we will tell you all the steps you have to carry out to get unique designs. Remember that to paint with airbrush it is important to dilute any type of paint with the neutral base paint thinner.
AIRBRUSH FOR PAINTING
The airbrush for painting sneakers is intended for all levels of users due to its ease of use and lightness. It is perfect for customising any type of shoe and accessories.
Airbrush for painting sneakers and other accessories. Easy to use for all levels.
HOW TO USE
Connect the airbrush to the Tarrago Compressor.
Pour the paint into the colour container after diluting it properly (*).
Hold the airbrush in your hand. Press the operating lever to allow air to escape. Pull back the operating lever gradually to start spraying.
The spray pattern will depend on the distance between the work surface and the airbrush.
Remove the needle cap to paint small lines or dots. To achieve this effect work very close to the surface while releasing a small amount of paint.
Empty the contents and clean the airbrush with water and a special brush.
*Thinning: Using the dosing cap: For Tarrago Sneakers Paint use 75% of the dye and 25% of Tarrago Sneakers Paint Neutral Base. For Tarrago Self Shine Colour Dye dilution is optional for thinner coats. For metallic colours, use 90% Self Shine Color Dye and 10% Self Shine Color Dye Neutral Base.
With a pipette: For Tarrago Sneakers Paint, add 1 ml/0.03 fl oz. of Tarrago Sneakers Paint Neutral Base to the colour container. For Self Shine Color Dye, dilution is optional for thinner coats. For metallic colours, add 0.5 ml/0.016 Fl. oz. of Self Shine Color Dye Neutral Base to the colour cup.
MAINTENANCE
Spray all paint and pour water into the colour cup.
Block the needle cap with a finger and spray.
Allow air stream to flow back through nozzle to clear paint residue. Remove your finger and squeeze out all the water inside the airbrush.
Repeat the process several times until there is no paint residue inside the airbrush.
Keep the nozzle and nozzle cap clean. Any dust will reduce the spraying effect.
Remove the needle and wipe off the remaining paint. Do not bend or damage the surface of the needle, as this may hinder the use of the airbrush.
RECOMMENDATIONS
This airbrush can be connected to any compressor.
SNEAKERS PAINT STARTER KIT
Complete Sneakers paint starter kit that includes everything you need to start customising sneakers and other accessories.
Presentation: Cardboard box 24,5 x 14 x 3,5 cm.
Included in this kit:
1 Sneakers Paint White 25ml
1 Sneakers Paint Black 25ml
1 Sneakers Paint Yellow Base 25ml
1 Sneakers Paint Intense Blue 25ml
1 Sneakers Paint Strawberry Red 25ml
1 Tarrago Deglazer Leather Preparer 25ml
5 Professional Paint Brush: 3 flats + 2 round.
If you need to get a specific colour to customise your trainers, check out our Sneakers Paint App and we will help you select it.
Don't know how to start customising sneakers?, don't know what products you need?, Do you want to have the most used colours in the same kit?
The perfect sneakers paint kit to get you started in the world of customising sneakers and accessories. It contains everything you need to start becoming a real creator of ideas and designs for your sneakers.
HOW TO CUSTOMIZE SNEAKERS WITH THE STARTER PAINT KIT?
1. Perform a superficial cleaning of the sneakers with the help of the Dust Cleaning Brush. Then deep clean the sneakers with the Natural Shoe Cleanerand leave it ready for the paint to adhere better.
2. To get the paint to adhere better, prepare the sneakers and remove possible resins using the Deglazer paint stripper.
3. Stir the contents of the paint you are going to use until you get a homogeneous colour.
4. Now you can start customising, repairing or changing the colour of your sneakers or accessories:
4.1 Use a sponge for larger surfaces. With a semi-drained paint brush, paint a corner of the sponge and rub it gently in a circular motion over the surface.
5. Once the personalisation of the sneakers has been completed, we recommend the following for an optimum result:
-If we want to protect the sneakers and get the same satin finish that the paints leave, apply a coat of the thinner for neutral base paint.
-If we want to protect the sneakers and get a matt finish, apply one coat of the matt finisher for sneakers.
-If we want to protect the sneakers and get a glossy finish, give a coat of the gloss finisher for sneakers.
TIPS
Very thin coats of paint should be applied. We recommend applying several thin coats if necessary rather than one very thick coat. Once the first coat of paint dries (1-3 minutes), apply a second coat if necessary, repeating the process to match the entire colour.
If we want to speed up the drying process between coats we can use a heat gun or hair dryer with caution (30 cm. minimum distance).
For metallic, fluorine and special effect paints, we recommend painting a coat of the white sneakers paint first, to improve the coverage and finish of the paint.
For glossy colours, we recommend painting a pre-coat with the same metallic coloured sneakers paint for a better finish.
For optimal drying and better resistance, let it dry for 12 hours.
Once the process is finished, wash the sponge, brush or airbrush with water or a special product to prevent drying.
Make the color more resistant with Sneakers Paint Neutral Base!
Sneakers Paint Neutral Base make the colours more resistant after use another's Sneakers Paint.
Improve the strength of the finish, and use it with airbrush for dilute the dye and maintain the properties.
Sneakers paint can be mixed between them by using the included dossing cap to achieve the desired tone.
The box contains a 25ml. / 0.9 fl. oz. color bottle, a paint brush, an applicator sponge, a dossing cap and a leaflet.
Tap to zoom
We use our own and third-party cookies to carry out analysis of use and measurement of our website to improve our services. If you go on surfing, we will consider you accepting its use. You can change the settings or get more information here.
