FILLER PASTE TO COVER CHAINS AND CUTS
The product is suitable for a wide variety of smooth and synthetic leathers, it can also be applied on rubber soles, but it is not suitable for suede and nubuck.
The application of the restorative filling paste to cover scratches and cuts provides a uniform appearance with excellent properties, to conceal or mask surface defects and provides great filling capacity and flexibility, satisfactorily promoting fluidity and equalization in the finish.
Once dry, the base can be painted with the desired color for a perfect and professional finish.
MODE OF USE
- Brush to remove dust. You can help yourself with our Dust Remover Brush to remove dust.
- Apply thin coats as necessary to completely cover the hole or defect. Preferably thin and with the help of a roller or a spatula.
- Let dry between coat and coat for about an hour. We remember not to put too much quantity in excess and apply thin layers.
- Dilute the last layer with water to match the paste with the texture of the surface to be repaired. Apply with a spatula or a cloth, to avoid imperfections and generate a smooth and homogeneous finish.
- Once the process is finished, let it dry for 12 hours for an optimal finish.
- Once the surface is completely dry, it can be painted with one of our stains and paints for a perfect and professional finish.
RECOMMENDATIONS
- In the case of covering holes, we recommend placing support at the bottom to keep the paste firm and promote a better finish.
- If you want to speed up the process, you can use a dryer, but apply it very gently, at a low temperature, and about 20 cm from the surface. However, it is recommended to let it dry naturally.
- If a large amount has been applied and there is excess paste on the surface, it can be rectified before painting in the following ways:
- a. Gently sand with very fine sandpaper.
- b. Very carefully remove the remaining paste with ethyl alcohol.
- Store between 5°C and 35°C, and protect from frost and cold.